Canada Gazette, Part I, Volume 150, Number 11: John C. Munro Hamilton International Airport Zoning Regulations
March 12, 2016
Statutory authority
Aeronautics Act
Sponsoring department
Department of Transport
REGULATORY IMPACT ANALYSIS STATEMENT
(This statement is not part of the Regulations.)
Issues
New Regulations would protect civil aviation safety at the John C. Munro Hamilton International Airport as the airport grows and develops by ensuring that the surrounding developments (e.g. buildings) do not interfere with the safe operation of the airport and aircraft.
The current Hamilton Airport Zoning Regulations were enacted in 1984 and no longer adequately protect the current and future operations of the airport. Currently, runway 12R-30L has been decommissioned and is now used as a taxiway, so no longer requires zoning protection. Runway 12L-30R has been renamed runway 12-30 and there is a planned runway extension of 491.51 m. Runway 07-25 has been renamed runway 06-24 and there is a planned runway extension of 734.40 m. The runway extensions require airport zoning protection from incompatible development on lands adjacent to and in the vicinity of the airport.
Background
The safety of aircraft operating in the airspace surrounding Canadian airports is of vital concern to private citizens and to federal and municipal governments. Airport zoning regulations (AZRs) are established to ensure that lands adjacent to and in the vicinity of airports are used in a manner compatible with the safe operations of an aircraft and the airport itself. These regulations are established not only to protect the present operations of an airport, but also to help ensure that potential and future development surrounding the airport remains compatible with the safe operation of aircraft and the airport.
As aeronautics is a federal jurisdiction, airport zoning regulations are the only legal means of restricting incompatible development adjacent to and in the vicinity of the airport.
Objectives
The proposed John C. Munro Hamilton International Airport Zoning Regulations would limit the height of new buildings, structures, and objects, including trees, or any additions to existing buildings, structures, and objects on lands adjacent to or in the vicinity of the John C. Munro Hamilton International Airport. In addition, lands subject to the Regulations would be restricted from land uses and activities that
- — interfere with communications to and from aircraft;
- — interfere with communications to and from any facility used to provide services relating to aeronautics; or
- — attract wildlife that creates a hazard to aviation safety.
Description
The proposed John C. Munro Hamilton International Airport Zoning Regulations would repeal the Hamilton Airport Zoning Regulations to update the Regulations to reflect the name of the airport.
The proposed Regulations reflect the current and future airport operations. Runway 12R-30L is now used as a taxiway and will no longer be zoned. Runway 12L-30R has been renamed runway 12-30 and the runway strip has been extended by 611.54 m. Runway 07-25 has been renamed runway 06-24 and the runway strip has been extended by 854.40 m. The dimensions of the proposed obstacle limitation surfaces are summarized in the table below.
| Runway | Runway Strip Length (metres) | Approach Surface Slope/Distance (percentage/metres) | Approach Surface Horizontal Distance (metres) | Transitional Surface (percentage) | Outer Surface Height/Radius (metres) |
|---|---|---|---|---|---|
12 |
3 169.94 |
1.66% for 3 000 then 2% for 12 000 |
15 000 |
14.3% |
45 / 4 000 |
30 |
3 169.94 |
1.66% for 3 000 then 2% for 12 000 |
15 000 |
14.3% |
45 / 4 000 |
06 |
2 864.40 |
1.66% for 3 000 then 2% for 9 000 |
9 000 |
14.3% |
45 / 4 000 |
24 |
2 864.40 |
1.66% for 3 000 then 2% for 12 000 |
15 000 |
14.3% |
45 / 4 000 |
The restrictions on the disposal of waste would be replaced by a wildlife hazard restriction which would include any land use or activities that attract wildlife that may create a hazard to aviation safety. The wildlife hazard zone would apply to lands under the 4-km circular outer surface and also under the approach surfaces to a distance of 8 km.
There would be a restriction on the development of lands under the outer surface from being used in a manner that would cause interference with any signal or communication to and from an aircraft or to and from any facility used to provide services relating to aeronautics.
“One-for-One” Rule
The “One-for-One” Rule does not apply to this proposal, as there is no change in administrative costs to business.
Small business lens
The small business lens does not apply to this proposal, as there are no costs (or costs are insignificant) to small business.
Consultation
The consultation required for airport zoning regulations includes early notice to stakeholders of Transport Canada's intention to make new or amended regulations, a 60-day formal public consultation period, and notification when the airport zoning regulations have been approved and deposited on record in the office of the provincial registrar of lands.
The City of Hamilton is the owner of the airport, which is operated by Tradeport International Corporation. Both the owner and the operator have requested the amendment to the Hamilton Airport Zoning Regulations and are paying the associated costs.
As part of the early consultation activities, Transport Canada briefed the affected municipalities, including the County of Brant, Haldimand County, and Tradeport International Corporation on February 20, 2013, and the City of Hamilton on May 27, 2013. The briefings consisted of a summary of the process to enact airport zoning regulations, Transport Canada's intention to publish public notices in the local newspapers, and an explanation of the impact of the Regulations on lands within their jurisdictions.
None of the municipalities had any objections to the proposed Regulations. The County of Brant requested that the public notices be published in its local newspapers.
A public notice of Transport Canada's intention to make new regulations for the John C. Munro Hamilton International Airport was published in the following newspapers: the Hamilton Spectator on June 22, 2013; Le Régional — the week of June 19 to June 25, 2013; the Brantford Expositor on June 19, 2013; and the Brant News on June 20, 2013.
Transport Canada did not receive any inquiries from the general public following the publication of the public notice in local newspapers.
Letters dated June 19, 2013, were sent to two aboriginal groups: the Six Nations of the Grand River and the Mississaugas of the New Credit. The letters provided notification of Transport Canada's proposed Regulations and contact information. Subsequently, the Six Nations of the Grand River requested a meeting with Transport Canada representatives. On August 26, 2013, Transport Canada met with representatives of the Six Nations of the Grand River in Ohsweken, Ontario, and briefed them on the proposed Regulations and answered questions to their satisfaction.
In addition to publication in the Canada Gazette, Part I, there must be a public notice published in local newspapers advising of the proposed Regulations and the commencement of a 60-day public consultation period. The public notice will include a link to the Canada Gazette Web site where the text of the proposed Regulations is published, notice of a public meeting where interested persons can learn more about the proposed Regulations, and the postal address and email address where the persons can submit written representations to the Minister of Transport.
Rationale
With the proposed Regulations, the airspace associated with the John C. Munro Hamilton International Airport would be kept obstacle-free, increasing the safety of aircraft operating at or in the vicinity of the airport. Further, the proposed Regulations would include restrictions on land use and activities incompatible with the safe operation of the airport and aircraft.
The costs of the proposed Regulations would be borne by the owner and the operator of the airport and are lost opportunity costs that cannot be quantified.
Implementation, enforcement and service standards
The approved Regulations and plans would be deposited in the Land Titles Office in the County of Brant, Haldimand County, and the City of Hamilton.
Copies of the approved Regulations and plans would be distributed to municipal planning departments, the John C. Munro Hamilton International Airport, NAV CANADA, and Transport Canada offices.
Department of Transport Civil Aviation Safety inspectors would monitor and enforce compliance.
Contact
Joseph Szwalek
Regional Director
Civil Aviation
Ontario Region
Department of Transport
4900 Yonge Street, 4th Floor
Toronto, Ontario
M2N 6A5
Telephone: 1-800-305-2059
Fax: 1-877-822-2129
PROPOSED REGULATORY TEXT
Notice is given, pursuant to subsection 5.5(1) (see footnote a) of the Aeronautics Act (see footnote b), that the Governor in Council, pursuant to paragraphs 5.4(2)(b) (see footnote c) and (c) (see footnote d) of that Act, proposes to make the annexed John C. Munro Hamilton International Airport Zoning Regulations.
Interested persons may make representations concerning the proposed Regulations to the Minister of Transport within 60 days after the date of publication of this notice. All such representations must cite the Canada Gazette, Part I, and the date of publication of this notice, and be sent to Joseph Szwalek, Regional Director, Civil Aviation — Ontario, Transport Canada, 4900 Yonge Street, 4th Floor, Toronto, ON M2N 6A5 (tel.: 1-800-305-2059; fax: 1-877-822-2129; email: CASO-SACO@tc.gc.ca).
Ottawa, February 18, 2016
Jurica Čapkun
Assistant Clerk of the Privy Council
John C. Munro Hamilton International Airport Zoning Regulations
Interpretation
Definitions
1 The following definitions apply in these Regulations.
airport means the John C. Munro Hamilton International Airport in the City of Hamilton, in the Province of Ontario, as described in Part 8 of the schedule. (aéroport)
airport reference point means the point described in Part 1 of the schedule. (point de référence de l'aéroport)
approach surface means an imaginary inclined surface that extends upward and outward from each end of a strip surface and that is described in Part 2 of the schedule. (surface d'approche)
outer surface means an imaginary surface that is located above and in the immediate vicinity of the airport and that is described in Part 3 of the schedule. (surface extérieure)
strip surface means the imaginary surface that is associated with a runway and that is described in Part 4 of the schedule. (surface de bande)
transitional surface means an imaginary inclined surface that extends upward and outward from the lateral limits of a strip surface and its approach surfaces and that is described in Part 5 of the schedule. (surface de transition)
wildlife hazard zone means the area that is located in the immediate vicinity of the airport and that is described in Part 7 of the schedule. (zone de péril faunique)
zoning plan means Plan File No. 25-009: 10-005 (Sheets 1 to 40), prepared by the Department of Public Works and Government Services and dated March 30, 2012. (plan de zonage)
Application
Lands near airport
2 These Regulations apply in respect of all lands that are adjacent to or in the vicinity of the airport and that are within the limit described in Part 6 of the schedule. For greater certainty, the lands include lands under water and public road allowances.
Building Restrictions
Prohibition — maximum height
3 A person must not place, erect or construct, or permit another person to place, erect or construct, on any of the lands, a building, structure or object, or an addition to an existing building, structure or object, any part of which would penetrate one of the following surfaces:
- (a) an approach surface;
- (b) the outer surface;
- (c) a transitional surface; or
- (d) a strip surface.
Interference with Communication
Prohibition — interference
4 A person must not use or develop, or permit another person to use or develop, any of the lands under the outer surface in a manner that causes interference with any signal or communication to or from an aircraft or to or from any facility used to provide services relating to aeronautics.
Natural Growth
Prohibition — maximum height
5 A person must not permit any object of natural growth that is on any of the lands to grow in such a manner as to penetrate any of the following surfaces:
- (a) an approach surface;
- (b) the outer surface;
- (c) a transitional surface; or
- (d) a strip surface.
Wildlife Hazard
Prohibition — activities or uses
6 (1) A person must not use, or permit another person to use, any of the lands described in Part 7 of the schedule for activities or uses that attract wildlife — particularly birds — that may create a hazard for aviation safety.
Exception
(2) Despite subsection (1), a person may use, or permit another person to use, any of the lands described in Part 7 of the schedule as a site for an open water storage reservoir for a period of 48 hours or less.
Repeal
7 The Hamilton Airport Zoning Regulations (see footnote 1) are repealed.
Coming into Force
Requirements — s. 5.6(2) of the Aeronautics Act
8 These Regulations come into force on the day on which the requirements set out in subsection 5.6(2) of the Aeronautics Act are met.
SCHEDULE
(Sections 1, 2 and 6)
In this schedule, all grid coordinates are in metres (m) and refer to the 1983 North American Datum - GRS80 Ellipsoid, 1989 adjustment (NAD83 Original), Zone 17, Universal Transverse Mercator (UTM) projection. Grid coordinates have been computed using a combined average scale factor of 0.9996636.
In this schedule, all azimuth are measured clockwise and grid-referenced to 0 degrees north.
In this schedule, all elevation values are in metres (m) and are based on the Canadian Geodetic Vertical Datum of 1928 (CGVD28), 1978 Southern Ontario Adjustment.
PART 1
Airport Reference Point
The airport reference point, as shown on sheet 22 of the zoning plan, is a point that may be located as follows:
- commencing at a point referred to as threshold 24, having grid coordinates of 587 957.53 E and 4 781 106.17 N, located on the centre line and at the eastern end of the strip surface associated with runway 06-24;
- thence southwesterly along the centre line of the strip surface associated with runway 06-24, a distance of 914.40 m to a point;
- thence southeasterly and at right angles to the centre line of the strip surface associated with runway 06-24, a distance of 180.00 m to the airport reference point, having grid coordinates of 587 398.59 E and 4 780 360.83 N.
- The assigned elevation of the airport reference point is 230.00 m.
PART 2
Approach Surfaces
The elevation of an approach surface at any point is equal to the elevation of the nearest point on the centre line of that approach surface. The elevation of an approach surface centre line is calculated from the assigned elevation of the abutting end of the strip surface and increases at the constant ratios set out in this Part.
The approach surfaces, as shown on sheets 1 to 27, 29 to 35 and 38 to 40 of the zoning plan, are surfaces abutting each end of the strip surfaces associated with runways 06-24 and 12-30. The approach surfaces are described as follows:
- (a) Approach Surface 06 is an imaginary inclined surface abutting the 06 end of the strip surface associated with runway 06-24 (Strip Surface 06-24) and ascending from an assigned elevation of 228.30 m, at a ratio of 1 m measured vertically to 60 m measured horizontally, to an imaginary horizontal line drawn at right angles to the projected centre line of Strip Surface 06-24 and distant 3 000 m measured horizontally from the end of Strip Surface 06-24; thence ascending, at a ratio of 1 m measured vertically to 50 m measured horizontally, to an imaginary horizontal line drawn at right angles to the projected centre line of Strip Surface 06-24, being the outer edge of the approach surface, and distant 9 000 m measured horizontally from the end of Strip Surface 06-24; the outer edge having a length of 1 500 m on either side of the projected centre line and an elevation 170 m above the assigned elevation of the 06 end of Strip Surface 06-24;
- (b) Approach Surface 24 is an imaginary inclined surface abutting the 24 end of Strip Surface 06-24 and ascending from an assigned elevation of 230.30 m, at a ratio of 1 m measured vertically to 60 m measured horizontally, to an imaginary horizontal line drawn at right angles to the projected centre line of Strip Surface 06-24 and distant 3 000 m measured horizontally from the end of Strip Surface 06-24; thence, ascending at a ratio of 1 m measured vertically to 50 m measured horizontally, to an imaginary horizontal line drawn at right angles to the projected centre line of Strip Surface 06-24, being the outer edge of the approach surface, and distant 15 000 m measured horizontally from the end of Strip Surface 06-24; the outer edge having a length of 2 400 m on either side of the projected centre line and an elevation 290 m above the assigned elevation of the 24 end of Strip Surface 06-24;
- (c) Approach Surface 12 is an imaginary inclined surface abutting the 12 end of the strip surface associated with runway 12-30 (Strip Surface 12-30) and ascending from an assigned elevation of 235.50 m, at a ratio of 1 m measured vertically to 60 m measured horizontally, to an imaginary horizontal line drawn at right angles to the projected centre line of Strip Surface 12-30 and distant 3 000 m measured horizontally from the end of Strip Surface 12-30; thence, ascending at a ratio of 1 m measured vertically to 50 m measured horizontally, to an imaginary horizontal line drawn at right angles to the projected centre line of Strip Surface 12-30, being the outer edge of the approach surface, and distant 15 000 m measured horizontally from the end of Strip Surface 12-30; the outer edge having a length of 2 400 m on either side of the projected centre line and an elevation 290 m above the assigned elevation of the 12 end of Strip Surface 12-30;
- (d) Approach Surface 30 is an imaginary inclined surface abutting the 30 end of Strip Surface 12-30 and ascending from an assigned elevation of 233.30 m, at a ratio of 1 m measured vertically to 60 m measured horizontally, to an imaginary horizontal line drawn at right angles to the projected centre line of Strip Surface 12-30 and distant 3 000 m measured horizontally from the end of Strip Surface 12-30; thence, ascending at a ratio of 1 m measured vertically to 50 m measured horizontally, to an imaginary horizontal line drawn at right angles to the projected centre line of Strip Surface 12-30, being the outer edge of the approach surface, and distant 15 000 m measured horizontally from the end of Strip Surface 12-30; the outer edge having a length of 2 400 m on either side of the projected centre line and an elevation 290 m above the assigned elevation of the 30 end of Strip Surface 12-30.
PART 3
Outer Surface
The outer surface, as shown on sheets 15 to 18, 20 to 23, 27 to 29, 36 and 37 of the zoning plan, is an imaginary surface located at a constant elevation of 45 m above the assigned elevation of the airport reference point but at 9 m above the surface of the ground when that elevation would place the outer surface at less than 9 m above the surface of the ground.
The limit of the outer surface is located in the City of Hamilton and is described as follows:
- commencing at the intersection of the southern limit of Rymal Road West (Road Allowance between the Townships of Barton and Glanford as widened) with the eastern limit of Glancaster Road (Road Allowance between the Townships of Ancaster and Glanford), being the northwest corner of Part 1 on Plan 62R-14989 (see sheet 17);
- thence easterly along the southern limit of Rymal Road West and Rymal Road East (PIN 17565-0998, PIN 16908-0425, PIN 16911-0077, PIN 16912-0042, PIN 16913-0282 and PIN 16914-0246) to the eastern limit of Lot 7, Concession 1, Geographic Township of Glanford (see sheet 18);
- thence southerly along the eastern limit of Lot 7, Concession 1, to the southeast corner of Lot 7, Concession 1;
- thence easterly along the limit between Concession 1 and Concession 2, Geographic Township of Glanford, to the northeast corner of Lot 8, Concession 2, Geographic Township of Glanford;
- thence southerly along the eastern limit of Lot 8, Concession 2, and its production southerly to the southern limit of Dickenson Road East (PIN 17397-0135) (see sheet 23);
- thence easterly along the southern limit of Dickenson Road East to the western limit of Miles Road (PIN 17389-0001);
- thence southerly along the western limit of Miles Road to the southern limit of Airport Road (PIN 17395-0103) (see sheet 29);
- thence westerly along the southern limit of Airport Road to the western limit of Miles Road (PIN 17390-0001);
- thence southerly along the western limit of Miles Road to the northern limit of White Church Road East (PIN 17394-0062);
- thence westerly along the northern limit of White Church Road East to the eastern limit of Lot 9, Concession 5, Geographic Township of Glanford;
- thence southerly in a straight line to the intersection of the southern limit of White Church Road East (PIN 17394-0062) with the eastern limit of Lot 9, Concession 6, Geographic Township of Glanford;
- thence southerly along the eastern limit of Lot 9, Concession 6, to the northern limit of Chippewa Road East (PIN 17393-0088) (see sheets 37 and 36);
- thence westerly along the northern limit of Chippewa Road East to the eastern limit of Highway 6 (PIN 17393-0001) (see sheet 28);
- thence westerly in a straight line to the intersection of the western limit of Highway 6 with the northern limit of Chippewa Road West (PIN 17401-0055);
- thence westerly along the northern limit of Chippewa Road West and its production westerly to the western limit of Glancaster Road (PIN 17401-0001) (see sheet 27);
- thence southerly along the western limit of Glancaster Road to the western limit of Fiddlers Green Road (PIN 17403-0094);
- thence northerly along the western limit of Fiddlers Green Road to the southern limit of Carluke Road West (PIN 17403-0028);
- thence northwesterly in a straight line to the intersection of the western limit of Fiddlers Green Road (PIN 17403-0029) with the northern limit of Carluke Road West (PIN 17403-0028);
- thence westerly along the northern limit of Carluke Road West to the western limit of Lot 42, Concession 6, Geographic Township of Ancaster;
- thence northerly along the western limit of Lot 42, Concession 6, to the southern limit of Butter Road West (PIN 17412-0123) (see sheet 21);
- thence westerly along the southern limit of Butter Road West to the western limit of Lot 40, Concession 6, Geographic Township of Ancaster (see sheet 20);
- thence northwesterly in a straight line to the intersection of the northern limit of Butter Road West (PIN 17412-0123) with the western limit of Lot 40, Concession 5, Geographic Township of Ancaster;
- thence northerly along the western limit of Lot 40, Concession 5, to the southern limit of Book Road West (PIN 17412-0084);
- thence northwesterly in a straight line to the intersection of the northern limit of Book Road West with the western limit of Lot 40, Concession 4, Geographic Township of Ancaster;
- thence northerly along the western limit of Lot 40, Concession 4, to the southern limit of Garner Road West (PIN 17415-0307) (see sheet 15);
- thence easterly along the southern limit of Garner Road West and Garner Road East (PIN 17415-0307, PIN 17414-0002 and PIN 17565-0972) to Rymal Road West (PIN 17565-0998) (see sheets 16 and 17);
- thence easterly along the southern limit of Rymal Road West to the Point of Commencement.
PART 4
Strip Surfaces
The elevation of a strip surface at any point is equal to the elevation of the nearest point on the centre line of that strip surface. The elevation of the strip surface centre line between the strip surface end and the closest strip surface threshold is equal to the elevation of the strip surface end. The elevation of the strip surface centre line between the strip surface thresholds is calculated using a constant ratio between the elevations of the strip surface thresholds and the elevations of the points along the runway centre line that are set out in the tables to this Part.
The strip surfaces, as shown on sheets 21 and 22 of the zoning plan, are imaginary rectangular surfaces described as follows:
| Item | Column 1 Starting Point |
Column 2 Starting Point Elevation (m) |
Column 3 End Point |
Column 4 End Point Elevation (m) |
Column 5 Distance Between Starting Point and End Point (m) |
Column 6 Constant Ratio Used to Calculate Elevation Between Starting Point and End Point |
|---|---|---|---|---|---|---|
| 1 | Threshold 06 | 228.30 | 'A' | 235.30 | 913.00 | +1 : 130.4286 |
| 2 | 'A' | 235.30 | 'B' | 237.10 | 567.00 | +1 : 315.0000 |
| 3 | 'B' | 237.10 | 'C' | 236.40 | 350.00 | -1 : 500.0000 |
| 4 | 'C' | 236.40 | 'D' | 234.40 | 290.10 | -1 : 145.0500 |
| 5 | 'D' | 234.40 | 'E' | 231.30 | 374.30 | -1 : 120.7419 |
| 6 | 'E' | 231.30 | Threshold 24 | 230.30 | 250.00 | -1 : 250.0000 |
Total Distance Between Thresholds = 2 744.40
| Item | Column 1 Starting Point |
Column 2 Starting Point Elevation (m) |
Column 3 End Point |
Column 4 End Point Elevation (m) |
Column 5 Distance Between Starting Point and End Point (m) |
Column 6 Constant Ratio Used to Calculate Elevation Between Starting Point and End Point |
|---|---|---|---|---|---|---|
| 1 | Threshold 12 | 235.50 | 'F' | 236.40 | 490.00 | +1 : 544.4444 |
| 2 | 'F' | 236.40 | 'G' | 237.80 | 767.77 | +1 : 548.4071 |
| 3 | 'G' | 237.80 | 'H' | 235.00 | 900.00 | -1 : 321.4286 |
| 4 | 'H' | 235.00 | 'D' | 234.40 | 350.00 | -1 : 583.3333 |
| 5 | 'D' | 234.40 | 'I' | 233.50 | 422.17 | -1 : 469.0778 |
| 6 | 'I' | 233.50 | Threshold 30 | 233.30 | 120.00 | -1 : 600.0000 |
Total Distance Between Thresholds = 3 049.94
PART 5
Transitional Surfaces
The elevation of a point on the lower edge of a transitional surface abutting a strip surface is equal to the elevation of the nearest point on the centre line of the abutting strip surface. The elevation of a point on the lower edge of a transitional surface abutting an approach surface is equal to the elevation of the nearest point on the centre line of the abutting approach surface.
Each transitional surface, as shown on sheets 16 to 18, 20 to 23, 27 and 28 of the zoning plan, is an imaginary inclined surface that extends upward and outward, from the lateral limits of the abutting strip surface and the abutting approach surface, at a ratio of 1 m measured vertically to 7 m measured horizontally and at right angles to the centre line of each abutting strip surface and approach surface to the intersection with the outer surface, or with another transitional surface.
PART 6
Limit of Area Containing Lands to Which These Regulations Apply
The limit of the area containing the lands to which these Regulations apply, as shown on sheets 1 to 40 of the zoning plan, is generally defined by the outer limit of the area covered by the approach surfaces, the outer surface, the strip surfaces, the transitional surfaces and the wildlife hazard zone. The limit is located in the City of Hamilton, the County of Brant, and Haldimand County, and is described as follows:
- commencing at the intersection of the southern limit of Rymal Road West (Road Allowance between the Townships of Barton and Glanford as widened) with the eastern limit of Glancaster Road (Road Allowance between the Townships of Ancaster and Glanford) being the northwest corner of Part 1 on Plan 62R-14989 (see sheet 17);
- thence easterly along the southern limit of Rymal Road West and Rymal Road East (PIN 17565-0998, PIN 16908-0425, PIN 16911-0077, PIN 16912-0042 and PIN 16913-0282) to the northwestern lateral limit of Approach Surface 24 (see sheet 18);
- thence northeasterly along the northwestern lateral limit of Approach Surface 24 on an azimuth of 39°28′18″ to a point having grid coordinates of 597 540.67 E and 4 792 962.42 N on the outer edge of Approach Surface 24, being a line drawn at right angles to the projected centre line of the strip surface and distant 15 000 m measured horizontally from the 24 end of Strip Surface 06-24 (see sheets 9, 10, 3, 1 and 2);
- thence southeasterly along the outer edge of Approach Surface 24 on an azimuth of 138°00′09″ for a distance of 4 800 m to a point having grid coordinates of 600 751.26 E and 4 789 396.38 N on the southeastern lateral limit of Approach Surface 24 (see sheets 4 and 5);
- thence southwesterly along the southeastern lateral limit of Approach Surface 24 on an azimuth of 236°32′00″ to the eastern limit of Lot 7, Concession 1, Geographic Township of Glanford (see sheets 4, 11, 10, 19 and 18);
- thence southerly along the eastern limit of Lot 7, Concession 1, to the southeast corner of Lot 7, Concession 1;
- thence easterly along the limit between Concession 1 and Concession 2, Geographic Township of Glanford, to the northeast corner of Lot 8, Concession 2, Geographic Township of Glanford;
- thence southerly along the eastern limit of Lot 8, Concession 2, and its production southerly to the southern limit of Dickenson Road East (PIN 17397-0135) (see sheet 23);
- thence easterly along the southern limit of Dickenson Road East to the western limit of Miles Road (PIN 17389-0001);
- thence southerly along the western limit of Miles Road to the northern lateral limit of Approach Surface 30;
- thence easterly along the northern lateral limit of Approach Surface 30 on an azimuth of 97°57′02″ to a point having grid coordinates of 603 130.45 E and 4 778 564.30 N on the outer edge of Approach Surface 30, being a line drawn at right angles to the projected centre line of the strip surface and distant 15 000 m measured horizontally from the end of Strip Surface 12-30 (see sheets 24, 25 and 32);
- thence southerly along the outer edge of Approach Surface 30 on an azimuth of 196°28′53″ for a distance of 4 800 m to a point having grid coordinates of 601 769.13 E and 4 773 963.07 N on the southern lateral limit of Approach Surface 30 (see sheet 39);
- thence westerly along the southern lateral limit of Approach Surface 30 on an azimuth of 295°00′44″ to the western limit of Miles Road (PIN 17389-0001) (see sheets 38, 31, 30 and 29);
- thence southerly along the western limit of Miles Road to the southern limit of Airport Road (PIN 17395-0103) (see sheet 29);
- thence westerly along the southern limit of Airport Road to the western limit of Miles Road (PIN 17390-0001);
- thence southerly along the western limit of Miles Road to the northern limit of White Church Road East (PIN 17394-0062);
- thence westerly along the northern limit of White Church Road East to the eastern limit of Lot 9, Concession 5, Geographic Township of Glanford;
- thence southerly in a straight line to the intersection of the southern limit of White Church Road East (PIN 17394-0062) with the eastern limit of Lot 9, Concession 6, Geographic Township of Glanford;
- thence southerly along the eastern limit of Lot 9, Concession 6, to the northern limit of Chippewa Road East (PIN 17393-0088) (see sheets 37 and 36);
- thence westerly along the northern limit of Chippewa Road East to the eastern limit of Highway 6 (PIN 17393-0001) (see sheet 28);
- thence westerly in a straight line to the intersection of the western limit of Highway 6 with the northern limit of Chippewa Road West (PIN 17401-0055);
- thence westerly along the northern limit of Chippewa Road West and its production westerly to the western limit of Glancaster Road (PIN 17401-0001) (see sheet 27);
- thence southerly along the western limit of Glancaster Road to the western limit of Fiddlers Green Road (PIN 17403-0094);
- thence northerly along the western limit of Fiddlers Green Road to the southeastern lateral limit of the transitional surface associated with Approach Surface 06;
- thence southwesterly along the southeastern lateral limit of the transitional surface associated with Approach Surface 06 on an azimuth of 226°05′36″ to a point having grid coordinates of 584 173.86 E and 4 776 932.51 N on the southeastern lateral limit of Approach Surface 06, being located on a line drawn at right angles to the projected centre line of Strip Surface 06-24 and distant 2 802 m measured horizontally from the 06 end of Strip Surface 06-24;
- thence southwesterly along the southeastern lateral limit of Approach Surface 06 on an azimuth of 219°28′18″ to a point having grid coordinates of 580 191.06 E and 4 772 096.14 N on the outer edge of Approach Surface 06, being a line drawn at right angles to the projected centre line of Strip Surface 06-24 and distant 9 000 m measured horizontally from the 06 end of Strip Surface 06-24 (see sheets 35, 34 and 40);
- thence northwesterly along the outer edge of Approach Surface 06 on an azimuth of 318°00′09″ for a distance of 3 000 m to a point having grid coordinates of 578 184.44 E and 4 744 324.91 N on the northwestern lateral limit of Approach Surface 06 (see sheets 34 and 33);
- thence northeasterly along the northwestern lateral limit of Approach Surface 06 on an azimuth of 56°32′00″ to a point having grid coordinates of 583 410.94 E and 4 777 779.89 N on the northwestern lateral limit of the transitional surface associated with Approach Surface 06, being located on a line drawn at right angles to the projected centre line of Strip Surface 06-24 and distant 2 802 m measured horizontally from the 06 end of Strip Surface 06-24 (see sheets 34, 26 and 27);
- thence northeasterly along the northwestern lateral limit of the transitional surface associated with Approach Surface 06 on an azimuth of 49°54′42″ to the western limit of Lot 42, Concession 6, Geographic Township of Ancaster;
- thence northerly along the western limit of Lot 42, Concession 6, to the southern limit of Butter Road West (PIN 17412-0123) (see sheet 21);
- thence westerly along the southern limit of Butter Road West to the western limit of Lot 40, Concession 6, Geographic Township of Ancaster (see sheet 20);
- thence northwesterly in a straight line to the intersection of the northern limit of Butter Road West (PIN 17412-0123) with the western limit of Lot 40, Concession 5, Geographic Township of Ancaster;
- thence northerly along the western limit of Lot 40, Concession 5, to the southern limit of Book Road West (PIN 17412-0084);
- thence northwesterly in a straight line to the intersection of the northern limit of Book Road West with the western limit of Lot 40, Concession 4, Geographic Township of Ancaster;
- thence northerly along the western limit of Lot 40, Concession 4, to the southern lateral limit of Approach Surface 12;
- thence westerly along the southern lateral limit of Approach surface 12 on an azimuth of 277°57′02″ to a point having grid coordinates of 569 972.78 E and 4 783 370.35 N on the outer edge of Approach Surface 12, being a line drawn at right angles to the projected centre line of Strip Surface 12-30 and distant 15 000 m measured horizontally from the 12 end of Strip Surface 12-30 (see sheets 15, 14, 13 and 12);
- thence northerly along the outer edge of Approach Surface 12 on an azimuth of 16°28′53″ for a distance of 4 800 m to a point having grid coordinates of 571 334.10 E and 4 787 971.58 N on the northern lateral limit of Approach Surface 12 (see sheet 6);
- thence easterly along the northern lateral limit of Approach Surface 12 on an azimuth of 115°00′44″ to the western limit of Lot 40, Concession 4, Geographic Township of Ancaster (see sheets 7, 8, 14 and 15);
- thence northerly along the western limit of Lot 40, Concession 4, to the southern limit of Garner Road West (PIN 17415-0307);
- thence easterly along the southern limit of Garner Road West and Garner Road East (PIN 17415-0307, PIN 17414-0002 and PIN 17565-0972) to Rymal Road West (PIN 17565-0998) (see sheets 16 and 17);
- thence easterly along the southern limit of Rymal Road West to the Point of Commencement.
PART 7
Wildlife Hazard Zone
The wildlife hazard zone, as shown on sheets 9 and 10, 14 to 19, 20 to 24, 26 to 30, 33 to 37 and 40 of the zoning plan, is located in the City of Hamilton, the County of Brant, and Haldimand County, and is described as follows:
- commencing at the intersection of the southern limit of Rymal Road West (Road Allowance between the Townships of Barton and Glanford as widened) with the eastern limit of Glancaster Road (Road Allowance between the Townships of Ancaster and Glanford), being the northwest corner of Part 1 on Plan 62R-14989 (see sheet 17);
- thence easterly along the southern limit of Rymal Road West and Rymal Road East (PIN 17565-0998, PIN 16908-0425, PIN 16911-0077, PIN 16912-0042 and PIN 16913-0282) to the northwestern lateral limit of Approach Surface 24 (see sheet 18);
- thence northeasterly along the northwestern lateral limit of Approach Surface 24 on an azimuth of 39°28′18″ to a point having grid coordinates of 593 042.52 E and 4 787 500.24 N on a line drawn at right angles to the projected centre line of Strip Surface 06-24 and distant 8 000 m measured horizontally from the 24 end of Strip Surface 06-24 (see sheet 9);
- thence southeasterly along a line drawn at right angles to the projected centre line of Strip Surface 06-24 and distant 8 000 m measured horizontally from the 24 end of Strip Surface 06-24 on an azimuth of 138°00′09″ for a distance of 2 700 m to a point having grid coordinates of 594 848.47 E and 4 785 494.34 N on the southeastern lateral limit of Approach Surface 24 (see sheet 10);
- thence southwesterly along the southeastern lateral limit of Approach Surface 24 on an azimuth of 236°32′00″ to the eastern limit of Lot 7, Concession 1, Geographic Township of Glanford (see sheets 19 and 18);
- thence southerly along the eastern limit of Lot 7, Concession 1, to the southeast corner of Lot 7, Concession 1;
- thence easterly along the limit between Concession 1 and Concession 2, Geographic Township of Glanford, to the northeast corner of Lot 8, Concession 2, Geographic Township of Glanford;
- thence southerly along the eastern limit of Lot 8, Concession 2, and its production southerly to the southern limit of Dickenson Road East (PIN 17397-0135) (see sheet 23);
- thence easterly along the southern limit of Dickenson Road East to the western limit of Miles Road (PIN 17389-0001);
- thence southerly along the western limit of Miles Road to the northern lateral limit of Approach Surface 30;
- thence easterly along the northern lateral limit of Approach Surface 30 on an azimuth of 97°57′02″ to a point having grid coordinates of 596 122.54 E and 4 779 543.04 N on a line drawn at right angles to the projected centre line of Strip Surface 12-30 and distant 8 000 m measured horizontally from the 30 end of Strip Surface 12-30 (see sheet 24);
- thence southerly along a line drawn at right angles to the projected centre line of Strip Surface 12-30 and distant 8 000 m measured horizontally from the 30 end of Strip Surface 12-30 on an azimuth of 196°28′53″ for a distance of 2 700 m to a point having grid coordinates of 595 356.80 E and 4 776 954.85 N on the southern lateral limit of Approach Surface 30 (see sheet 30);
- thence westerly along the southern lateral limit of Approach Surface 30 on an azimuth of 295°00′44″ to the western limit of Miles Road (PIN 17389-0001) (see sheet 29);
- thence southerly along the western limit of Miles Road to the southern limit of Airport Road (PIN 17395-0103) (see sheet 29);
- thence westerly along the southern limit of Airport Road to the western limit of Miles Road (PIN 17390-0001);
- thence southerly along the western limit of Miles Road to the northern limit of White Church Road East (PIN 17394-0062);
- thence westerly along the northern limit of White Church Road East to the eastern limit of Lot 9, Concession 5, Geographic Township of Glanford;
- thence southerly in a straight line to the intersection of the southern limit of White Church Road East (PIN 17394-0062) with the eastern limit of Lot 9, Concession 6, Geographic Township of Glanford;
- thence southerly along the eastern limit of Lot 9, Concession 6, to the northern limit of Chippewa Road East (PIN 17393-0088) (see sheets 37 and 36);
- thence westerly along the northern limit of Chippewa Road East to the eastern limit of Highway 6 (PIN 17393-0001) (see sheet 28);
- thence westerly in a straight line to the intersection of the western limit of Highway 6 with the northern limit of Chippewa Road West (PIN 17401-0055);
- thence westerly along the northern limit of Chippewa Road West and its production westerly to the western limit of Glancaster Road (PIN 17401-0001) (see sheet 27);
- thence southerly along the western limit of Glancaster Road to the western limit of Fiddlers Green Road (PIN 17403-0094);
- thence northerly along the western limit of Fiddlers Green Road to the southeastern lateral limit of the transitional surface associated with Approach Surface 06;
- thence southwesterly along the southeastern lateral limit of the transitional surface associated with Approach Surface 06 on an azimuth of 226°05′36″ to a point having grid coordinates of 584 173.86 E and 4 776 932.51 N on the southeastern lateral limit of Approach Surface 06, being located on a line drawn at right angles to the projected centre line of Strip Surface 06-24 and distant 2 802 m measured horizontally from the 06 end of Strip Surface 06-24;
- thence southwesterly along the southeastern lateral limit of Approach Surface 06 on an azimuth of 219°28′18″ to a point having grid coordinates of 580 833.66 E and 4 772 876.45 N on a line drawn at right angles to the projected centre line of Strip Surface 06-24 and distant 8 000 m measured horizontally from the 06 end of Strip Surface 06-24 (see sheets 35, 34 and 40);
- thence northwesterly along a line drawn at right angles to the projected centre line of Strip Surface 06-24 and distant 8 000 m measured horizontally from the 06 end of Strip Surface 06-24 on an azimuth of 318°00′09″ for a distance of 2 700 m to a point having grid coordinates of 579 027.70 E and 4 774 882.35 N on the northwestern lateral limit of Approach Surface 06 (see sheets 34 and 33);
- thence northeasterly along the northwestern lateral limit of Approach Surface 06 on an azimuth of 56°32′00″ to a point having grid coordinates of 583 410.94 E and 4 777 779.89 N on the northwestern lateral limit of the transitional surface associated with Approach Surface 06, being located at a line drawn at right angles to the projected centre line of Strip Surface 06-24 and distant 2 802 m measured horizontally from the 06 end of Strip Surface 06-24 (see sheets 34, 26 and 27);
- thence northeasterly along the northwestern lateral limit of the transitional surface associated with Approach Surface 06 on an azimuth of 49°54′42″ to the western limit of Lot 42, Concession 6, Geographic Township of Ancaster;
- thence northerly along the western limit of Lot 42, Concession 6, to the southern limit of Butter Road West (PIN 17412-0123) (see sheet 21);
- thence westerly along the southern limit of Butter Road West to the western limit of Lot 40, Concession 6, Geographic Township of Ancaster (see sheet 20);
- thence northwesterly in a straight line to the intersection of the northern limit of Butter Road West (PIN 17412-0123) with the western limit of Lot 40, Concession 5, Geographic Township of Ancaster;
- thence northerly along the western limit of Lot 40, Concession 5, to the southern limit of Book Road West (PIN 17412-0084);
- thence northwesterly in a straight line to the intersection of the northern limit of Book Road West with the western limit of Lot 40, Concession 4, Geographic Township of Ancaster;
- thence northerly along the western limit of Lot 40, Concession 4, to the southern lateral limit of Approach Surface 12;
- thence westerly along the southern lateral limit of Approach Surface 12 on an azimuth of 277°57′02″ to a point having grid coordinates of 576 980.70 E and 4 782 391.61 N on a line drawn at right angles to the projected centre line of Strip Surface 12-30 and distant 8 000 m measured horizontally from the 12 end of Strip Surface 12-30 (see sheets 15 and 14);
- thence northerly along a line drawn at right angles to the projected centre line of Strip Surface 12-30 and distant 8 000 m measured horizontally from the 12 end of Strip Surface 12-30 on an azimuth of 16°28′53″ for a distance of 2 700 m to a point having grid coordinates of 577 746.44 E and 4 784 979.80 N on the northern lateral limit of Approach Surface 12 (see sheet 6);
- thence easterly along the northern lateral limit of Approach Surface 12 on an azimuth of 115°00′44″ to the western limit of Lot 40, Concession 4, Geographic Township of Ancaster (see sheets 7, 8, 14 and 15);
- thence northerly along the western limit of Lot 40, Concession 4, to the southern limit of Garner Road West (PIN 17415-0307);
- thence easterly along the southern limit of Garner Road West and Garner Road East (PIN PIN 17415-0307, PIN 17414-0002 and PIN 17565-0972) to Rymal Road West (PIN 17565-0998) (see sheets 16 and 17);
- thence easterly along the southern limit of Rymal Road West to the Point of Commencement.
PART 8
Airport Lands
The John C. Munro Hamilton International Airport, as shown on sheets 16, 21, 22 and 28 of the zoning plan, is comprised of those lands in the City of Hamilton that are described as follows:
PIN 17399-0480 (LT)
The whole of Lots 20 & 21 and part of Lots 18, 19 & Parcel ‘B', Plan 1230; Part of Lots 1-5, Concession 3, Geographic Township of Glanford; Part of Lots 1-5, Concession 4, Geographic Township of Glanford; Part of the Road Allowance between the Geographic Townships of Glanford and Ancaster; Part of Lots 46 - 49, Concession 5, Geographic Township of Ancaster; and part of the Road Allowance between Lots 48 and 49, Concession 5, Geographic Township of Ancaster, designated as Parts 2, 4, 5 & 8, Plan 62R-11334, SAVE AND EXCEPT Part 1, Plan 62R-14613, Parts 1-6 inclusive, Plan 62R-16499, and Part 2, Plan 62R-17188.
PIN 17399-0479 (LT)
Part of Lot 5, Concession 3, Geographic Township of Glanford, designated as Parts 1-6 inclusive, Plan 62R-16499, SAVE AND EXCEPT Parts 3, 5 & 6, Plan 62R-18932.
PIN 17399-0331 (LT)
Part of Lot 45, Concession 5, Geographic Township of Ancaster, designated as Part 1, Plan 62R-11334, SAVE AND EXCEPT Part 18, Plan 62R-14623.
PIN 17399-0306 (LT)
Part of Lot 4, Concession 4, Geographic Township of Glanford, designated as Part 2, Plan 62R-10716, SAVE AND EXCEPT Parts 3, 5 & 6, Plan 62R-17188.
PIN 17399-0293 (LT)
Part of Lot 46, Concession 5, Geographic Township of Ancaster, designated as Parts 1 & 2, Plan 62R-17517.
PIN 17399-0196 (LT)
Part of Lot 4, Concession 4, Geographic Township of Glanford, designated as Part 1, Plan 62R-10716.
[10-2-o]